Custom black iron pedestrian gate with straight square pickets and a simple top rail closing the side yard between a tan stucco house and a block wall in Phoenix, Arizona, gravel and agave in front, morning light

Phoenix Custom Gates

Custom Iron Gates in Phoenix, AZ

Courtyard, entry and side-yard gates drawn to your opening, then welded, finished and hung.

Custom Iron Gates for Phoenix Homes

Iron Gates Phoenix has fabricators who design and build custom iron gates for entries, courtyards and side yards across Phoenix. A custom gate is sized to the opening you have, so it hangs without filler pieces or a gap at the latch.

Most Phoenix wrought iron gates we build are steel tube frames with square or round pickets. From there, the look is yours: a straight top, an arch, scrolls, collars, finials or a horizontal modern pattern.

We draw the gate to scale with the hinge side, swing direction and latch height marked. You approve the drawing before fabrication starts.

Get a Free Estimate

Arched black iron entry gate with scroll details between two stone-clad pillars leading into a Phoenix home courtyard with a fountain beyond, soft evening light

Custom Gate Styles We Build

Black iron courtyard gate with a wide arch and vertical pickets opening onto a tiled entry patio with potted plants

Courtyard and entry gates

Arched or flat-top gates that close off a front courtyard, often in pairs between stucco or stone pillars.

Side-yard gates

Single gates between the house and a block wall, sized for a wheelbarrow or trash bins to pass.

Modern gate of a black steel frame with horizontal cedar slats set in a stucco wall, clean lines, afternoon light

Steel and wood gates

A black steel frame filled with horizontal cedar or composite slats for privacy and a modern look.

Close-up of a heavy black iron gate ring pull, thumb latch and a keyed lock box welded to a gate frame

Hardware that lasts

Ring pulls, thumb latches, keyed lock boxes and heavy hinges welded or bolted to suit the gate.

Choosing Materials for a Custom Iron Gate

Part	Common choices	Why it matters
Frame	Square or rectangular steel tube	Stiffness keeps the gate from racking and sagging
Pickets	Square bar, round bar or tube	Sets the look and how much you can see through
Fill	Pickets, scrolls, slats or perforated panel	Controls privacy and wind load
Finish	Powder coat or paint	Powder coat for new work; paint for touch-ups
Hinges	Adjustable barrel or weld-on heavy hinges	Lets us fine-tune the swing after install

How a Custom Gate Gets Built

Measure. We measure the opening at the top and bottom, check the slope under the swing and look at what the gate hangs from.
Draw. You get a scaled drawing with style, height, hinge side and hardware.
Fabricate. Steel is cut and welded in the shop, welds are ground smooth and the gate is finished.
Hang. The gate is hung, leveled and adjusted so it latches with one hand.

Custom Iron Gates Questions

How long does a custom iron gate take?

Most of the time is in the shop after you approve the drawing. We give you a schedule with the estimate, and install day for a single gate is usually a few hours.

Can you match my existing fence?

Usually. We measure picket size and spacing and copy the top style so a new gate looks like it belongs.

Can a new gate hang on my block wall?

Yes, if the wall can take the load. Heavier gates get a steel post set in concrete next to the wall instead.

Do you make arched gates?

Yes. Arches can be built into the top rail of single gates and matched across double gates.

Get a Free Custom Gate Estimate

Send a photo of the opening and the style you like. We'll measure and draw it.

Call 602-905-4842

Free estimate, no obligation